Tag Archives: safe

CFLs: When and where NOT to use them

I’m going to annoy a lot of good people with this post.
I’m a big fan of CFLs in most places throughout the home. The energy savings they offer is tremendous, and they pay for themselves in very short order.
A few years ago purchasing CFLs was hit or miss. Some would start right up and give a good bright light, some would not. The “special” bulbs such as bathroom globes, dimmable spots, and others could be hard to find and expensive to purchase. Today, while there are still occasional crummy bulbs to be found, most will give you a good bright light and last a long time. You can find, with relative ease, candelabras, spots, exterior-rated, dimmable, globes and many more.
Here’s the part where I annoy a lot of good people: Not every bulb in your home should be a CFL.
CFLs contain a small amount of mercury (something less than 1/100th that of a  thermometer.) They’re perfectly fine while intact but if they break, 4 micrograms or so of mercury can be released. That’s not much, and most people (including me) don’t get particularly concerned about it, but why not avoid the problem in locations most prone to risk of breaking?
I’ve never knocked over a table or floor lamp, but I know it happens. Especially in homes with children, I encourage people to keep CFLs out of these types of fixtures. Other places in the home, like clip-on lamps, low-hanging basement lights (usually just a bulb in a socket with no protection) can become an issue as well.
Fixtures throughout the rest of the home, including bathroom lights, recessed lights, enclosed hanging fixtures, etc. are perfect for CFLs. Also, LEDs are coming down in price and contain no mercury at all.
If you do break a bulb, here are the EPA’s official instructions on how to clean it up: http://www.epa.gov/cfl/cflcleanup-detailed.html
Finally, I was recently made aware of an email making the rounds about CFLs catching fire. Given the way CFLs work (very different than incandescent bulbs) and their significantly lower heat, it made no sense so I investigated. I quickly came upon this article at Snopes.com which put the issue to bed – there is no fire hazard and the email is erroneous.
UPDATE: One of the great things about this blog and the Arlington community is the wealth of knowledge. Two things have been pointed out to me that merit mention.
1. Only CFL bulbs specifically labeled as “dimmable” should be placed in fixtures that use dimmer switches.
2. Buy only CFL bulbs labeled as “Energy Star.” Why? Aside from energy consumption issues, in order to gain the Energy Star label the bulb must meet certain safety requirements. Non Energy Star bulbs do not have certain insulative properties that prevent overheating and fires.
3. CFLs have a hard time, and potentially create a safety hazard, in enclosed fixtures such as ceiling fixtures. CFLs put out very little heat and don’t like heat. In an enclosed fixture they can overheat and burn out faster than their expected life span.

Is your direct vent clear?

We keep getting more snow

We’ve had a lot of snow locally in the last few weeks. Another 8″+ today has made the commute difficult and added significantly more to the piles of snow next to our driveways.

As you’re shoveling your driveway here’s a safety chore for you: Check your dryer and direct venting utilities (hot water heater, furnace, etc.)
If the vents get blocked it will not only prevent your appliance from functioning properly but it can actually send the CO into your home rather than outside, as designed. Every year we hear and read stories about people who get ill and/or die from CO poisoning in their own homes. Please take the few moments to make sure yours are clear of snow or other things, for your and your family’s safety.
In addition, you should also have functioning CO monitors in your home, with fresh batteries.
Enjoy the snow!